Anan-100DE

Quick Overview

The Apache Labs ANAN-100DE is a 100 watt HF + 6M Software Defined Radio multi-mode transceiver.
Excl. Tax: £2,624.96 Incl. Tax: £3,149.95
ANAN-100DE

Details

Download Latest Firmware Here: Firmware  Icon

 

The Apache Labs ANAN-100DE is a 100 watt HF + 6M Software Defined Radio multi-mode transceiver. It has two separate physical receivers which are Direct Down Conversion, this provides the ability for continuous, uninterrupted, receive coverage from 10KHz to 55MHz. It can also support up to 14 receivers, 7 per each physical receiver (sharing the same antenna) each at the same time. The ANAN-100DE can also be used for diversity reception. The ANAN-100DE provides 3 separate antenna ports, low level RF inputs/outputs for transverters, as well as speaker output, headphone, mic and key jacks. A standard RJ-45 ethernet connection is used on the ANAN-100. No sound card, firewire, or USB required. Firmware updates via Ethernet. Several open source software packages are available with PowerSDRmRX (the OpenHPSDR version of PowerSDR) being the best at the moment. Many other packages are in development such as cuSDR. cuSDR promises great things for the future (but is receive only at the moment), it already has the ability to show the complete spectrum from 0.1 to 55MHz on the spectrum display and supports up to 7 receivers at once. Mac and Linux software are also available.

 

Specifications & Features:

 

  • Continuous, uninterrupted, receive coverage from 10KHz to 55MHz. .
  • Transmit and receiver image rejection > 110dB
  • Full duplex operation, any split over entire 160m to 6m range.
  • Built-in high performance preamp, with a noise floor typically -135dBm
  • FPGA code can be updated via the Industry Standard TCP/IP network Ethernet connection
  • Separate open-collector PTT connection for amplifier control, etc, with sequencer
  • Microphone PTT jumper-selectable from tip or ring connection
  • Bias for electret microphones via jumper
  • Jumper selected in-built low noise and high efficiency switch mode power supply designed by Kjell Karson,LA2NI – less than 600mA (receive - one receiver) from a 13.8V supply
  • I2C bus connector for control of external equipment
  • Full QSK operation (performance dependant on associated PC and control software)
  • Low-level transmitter output for transverter use via user-selectable output attenuator
  • Stereo audio outputs at line and headphone levels
  • In-built 1W stereo audio amplifier for directly driving speakers
  • Direct, de-bounced connections for a Morse key (straight or iambic) and PTT
  • Low phase noise (-137dBc/Hz @ 1kHz) 122.88MHz master clock, which can be phase-locked to an internal 10MHz TCXO or external fequency reference
  • Industry Standard TCP/IP network Ethernet interface supports static, APIPA or DHCP IP address
  • Eight (8) Layer PCB design for the most professional, state-of-the-art, design available.
  • Mosfet 100W tx output (160M-6M)
  • Software Configurable Triple antenna ports

Additional Information

manufacturer Apache Labs
Bands Covered HF Bands, 6m
Maximum Output power 51W to 100W

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register