Icom IC-7410 HF Transceiver

Quick Overview

Icom HF/50MHz Base Station Transceiver IC-7410.

Excl. Tax: £1,249.99 Incl. Tax: £1,499.99
IC-7410

Details

Icom proudly announces the debut of the new HF/50MHz transceiver IC-7410. It is aimed as a mid range rig for Amateurs who are looking to enjoy the HF bands.

 

The IC-7410 has been designed as an HF/50MHz specialized rig with excellent performance and features in this category. The IC-7410 employs high grade DSP unit and double conversion super-heterodyne system developed from the latest technology used in our higher grade rigs such as the IC-7800/7700/7600 series. In addition, the IC-7410 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz/6kHz). When used with these 1st IF filters, narrow mode signals such as the CW and SSB modes are protected from adjacent strong signals.

Accessories for this radio include : (click link to visit page)

Icom Accessories 
Microphone : SM-30, SM-50
Speaker : SP-23, SP-34
Power Supply : PS-126
Antenna Tuner : AH-4

Non Icom Accessories
Programming Software : WCS-7410-USB 
Power Supply :
 Power-Max-65-NF
Antenna Tuner : MFJ-994B
 

Faster DSP unit and in-house DSP expertise The IC-7410 employs a much higher speed DSP unit compared to the IC-746PRO/7400's DSP unit. The AD/DA converter AK4620B allows for a high dynamic range and superior S/N ratio.
Icom has many years of DSP expertise, and has been key in development of the technology. The IC-7410 represents the latest in digital achievement and performance. 

Double-conversion superheterodyne The IC-7410 employs a double conversion superheterodyne system which has an image rejection mixer for the 2nd mixer stage. When compared to a typical triple-conversion system, signal distortion is dramactically reduced.

+30dBm third-order intercept point (IP3) Icom's analog RF circuit experience combined with the latest DSP software technology results in +30dBm IP3 equivalent to the IC-7600. Even in tough RF conditions, such as interference by broadcast stations or strong neighboring ham stations, a weak signal can be clearly received by the IC-7410.

Three first IF filters (3/6/15kHz)* The IC-7410 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz FL-431 and 6kHz FL-430). By changing the first IF filter width according to the operating mode, the desired signal is protected from the influence of nearby strong stations. The 3kHz first IF filter is especially effective in the CW and SSB modes. (Fixed for 15kHz in FM mode.)
* in 14MHz

High frequency stability A high stability TCXO crystal oscillator provides ±0.5ppm of high frequency stability over a wide temperature range (0°C to +50°C). This allows for a long stable operating time in modes such as RTTY.

Large, multi-function LCD The display increases in width from the IC-746PRO/7400. The large multi-function LCD shows frequency, 9-character channel name, channel number, multi functional meter (includes S-meter, RF output, SWR and ALC level). The dot-matrix portion of the LCD shows the following items:
• Channel name
• Band scope
• Memory keyer contents
• Function key assignment
• RTTY decoder screen
• Graphical SWR scale

Simple band scope The built-in simple band scope shows the band condition at a glance and is handy for searching for active stations.

RTTY demodulator and decoder The built-in RTTY demodulator and decoder allows you to instantly read an RTTY message on the display. No external units or PC required. The built-in tuning indicator visually helps in critical tuning.

Ample CW functions All of the following CW capabilities are included in the IC-7410
• Large CW PITCH knob and independent BK-IN (break-in) delay knob improve operating efficiency
• CW wave form controlled by the DSP
• 4 keyer channels with 70 characters of transmit memory per channel
• Multi-function electronic keyer with adjustable keying speed from 6-48 wpm, dot-dash ratio from 1:1:2.8 to 1:1:4.5 and paddle polarity
• Bug keyer and full break-in function
• Continuously adjustable CW pitch control from 300-900Hz
• Double key jacks (front and rear panels)
• CW reverse

Built-in antenna tuner The internal antenna tuner covers from 1.8MHz to 54MHz and automatically tunes for low SWR. Variable capacitors provide higher accuracy than a typical mechanical relay tuner. Once you transmit on a frequency, the tuner can instantly retune the frequency using its built-in memory.

USB connector for PC control The IC-7410 has a standard type B USB connector and can be connected to a PC. Modulation input, audio output, RTTY demodulator output and CI-V command can be controlled via the USB cable. Also, the conventional CI-V remote control jack is built-in to the IC-7410.

Large heat sink When compared to the IC-746PRO/7400, the IC-7410's large heat sink improves heat dissipation. Even during long hours of heavy-duty cycle operation, the IC-7410 provides stable output power.

Optional RS-BA1 IP remote control software The optional RS-BA1 allows you to use the IC-7410 from another room using your home network or even from a remote location over the Internet. Most settings such as filter width, AGC constant, etc., can be controlled from your PC.

Additional Information

manufacturer Icom
Bands Covered HF Bands, 6m
Maximum Output power 51W to 100W

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register