bhi DESKTOP SPEAKER
10 watt DSP noise cancelling base station speaker
The bhi DESKTOP 10 watt DSP noise cancelling base station speaker will work with most radios, transceivers, receivers, and SDR radios, giving a new listening experience. The new rotary controls make it very easy to use and set up to your own operating conditions.
The DESKTOP speaker comprises a 4" bass driver and a 1" tweeter unit with an amplified bhi DSP noise cancelling unit capable of producing up to 10 Watts audio (peak). There are rotary controls on the side of the speaker for volume and filter level control.
The DESKTOP speaker can be connected to a stereo line level audio input signal, or to a standard speaker level audio signal from an extension speaker socket. There is a 3.5mm headphone socket below the controls that can accept either a 3.5mm mono or stereo jack plug.
The speaker is supplied with a quality 1.2 metre audio cable with a moulded 3.5mm jack plug on one end and 4mm banana plugs on the other, as well as a 2.1mm fused DC power lead and user manual.
- Quality 10 watt DSP base station speaker
- 4" bass driver and 1" tweeter for excellent audio
- Works with most radios and receivers including SDR radios
- Simple to operate with easy to two use rotary controls
- Speaker level and line level audio connections
- Audio input level overload feature
- Noise reduction 9 to 35dB (8 levels)
- All functions microprocessor controlled
- 3.5mm headphone socket (mono or stereo phones)
Connector type 2.1mm DC power jack (centre positive)
Input voltage 12 to 18 Volts DC
Input current 10mA standby
125mA active (no signal)
Line Level Audio Input
Connector type 3.5mm Mono or Stereo line level
Input voltage range 160mV to 1.6V pk-pk
Input impedance 10kΩ (±2kΩ) nominal
Speaker Level Audio Input
Connector type 2 x 4mm banana socket/screw binding posts (mono)
Input voltage range 350mV to 3.5V pk-pk
Input impedance 8Ω (±2Ω) nominal
Input power rating 1.5W max
Speaker output power 10W peak (supply voltage of 18V)
Bandwidth 50Hz to 4.3kHz
Volume levels 16 levels (3dB steps)
Headphone output 3.5mm mono or stereo (8 to 64 Ohms)
DSP Noise Cancellation
Filter levels 8 levels + off
Noise reduction 9dB to 35dB
Tone reduction 4dB to 65dB
Status LED Multicolour LED (red, amber, green)
Audio tones Power-up, power-down, DSP filter level, volume and memory store
Input overload indication.
Power/Volume Digital rotary encoder with push function
DSP level Digital rotary encoder with push function
Weight 1.90kg (shipping weight)
Dimensions 200(H) x 150(D) x 160(W)mm
Note: Elecraft K3 users: To connect to the K3 using the speaker lead supplied you need to either make up an audio lead with a 3.5mm stereo plug (tip only connected) to a 3.5mm mono socket, or purchase one of our ALD-009 leads, or alternatively use a 3.5mm stereo plug to plug lead and connect from your K3 to the line in socket on the DESKTOP speaker (ALD-007).
Download Datasheet Here: