Heil GM-ELITE
Gold Elite dual element hand microphone HC-5.1 narrow & Elite wide elements 4-pin XLR.
GM Elite
The Gold Elite microphone is designed and crafted specifically for amateur radio communications. It contains two distinctly different high-performance dynamic elements that are available at the flip of a switch to meet the different types of communications.
The WIDE position has the Heil Elite full range element producing smooth articulate 60Hz – 16 kHz audio with the traditional Heil +4 dB peak centered at 2 kHz. This gives the new Gold Elite excellent voice articulation along with its ‘big bottom’ low end that is so important for producing a well balanced, studio quality SSB signal.
The NARROW position features the HC-5.1 dynamic element producing a smooth response of 200Hz – 8 kHz. The HC-5.1 element is designed to respond to those older rigs as well as today’s transceivers with onboard DSP EQ. The HC-5.1 produces full range broadcast audio as well as the tailored DX/Contest audio by simply adjusting your EQ. New mic technology to meet today’s new DSP technology.
The ‘soft touch’ PTT switch is wired to pins 3 and 4 for transmit control. The microphone audio is fed to pins 1 (shield) and 2 of the four pin XLR.
the Gold Elite useS the Heil CC-1 Connecting Cables AND comeS with a foam windscreen and a 5/8”-27 microphone clip that is designed for our booms and desk stands.
Required Adaptor Cable:
Yaesu
- 8-Pin Round - CC-1-Y8 or CH-1-Y8
- 8-Pin Modular - CC-1-YM or CC-1-YM
Kenwood
- 4-Pin Round - CC-1-K4
- 8-Pin Round - CC-1-K8 or CH-1-K8
- Modular - CC-1-KM or CH-1-KM
Icom
- 8-Pin Round - CC-1-I8
- Modular - CC-1-IM
Elecraft
- K2/3 - CC-1-K8
Required Support Assemblies:
(To suspend the Microphone, you require a Shock Mount & a Support Arm - the Mounts replace the C Clamp)
- SM-1 Shock Mount
- PL2T Support Arm (shipped with C Clamp)
- HB-1 Support Arm (shipped with C Clamp)
- DT-1 Flush Mount that mounts through a 1.5” hole in the desk top
- FL-2 Flange Mount secures to any flat surface
- WM-1 Wall Mount
- RS-1 12” Riser Mount
PTT:
- HS-2 Hand Switch
- FS-2 Deluxe Foot Switch
- FS-3 Budget Foot Switch
Manufacturer | Heil |
---|