ANT SWITCH, 5-POS, HF/VHF/UHF, L.PROTECTED, 220VAC
Ameritron's Remote Coax Switch lets you remotely switch up to five separate antennas using one inexpensive small control line (like standard telephone wire). Eliminate a tangle of troublesome coax and have a simple and neat installation with just a single feed line
The RCS-8V consists of two units, the weatherproof switching box that mountson your tower or mast and the control unit that's placed at your operating station
VSWR is less than 1.2 from DC to 250 MHz and less than 0.1 dB loss at 150 MHz, great for the HF/VHF/UHF operator
It handles over 5 kW below 30 MHz and 1 kWat 150 MHz. You can ground unused positions or leave them open
The indoor control unit is all metal to prevent RFI and TVI. It also has LEDs to indicate the antenna you've selected. A Lexan scratch-proof panel has a markable surface for labeling your antenna positions
RCS-8V operates from a 120 VAC power source or RCS-8VX for 220/240 VAC. Use any 6 conductor control line (not supplied) and allows safe operation with 14V control voltage
RCS-8VN: Same as RCS-8V but has N-type connectors instead of SO-239
Number of antennas positions: 5
Loss at 150 MHz: Less than .1dB
VSWR: under 1.2 to 1 from DC to 250 MHz.
Impedance: 50 ohms
Power Capability: > 5kW Watts below 30 MHz, 1 kW at 150 MHz
Antenna select time: 50 ms.
Power requirements: 120 VAC @100 mA, AC adapter supplied
Connectors: Teflon SO-239
Control Box: 6" x 6 ?" x 2 ¼"
Switch Box: 5 ?" x 7" x 3"