Arial-51 Sky - SDR Transceiver.

Quick Overview

Superb SDR transceiver - QRP 5 Watts


With outstanding receiver performance, rivals Elecraft models!

Regular Price: £699.00

special-price Excl. Tax: £499.17 Incl. Tax: £599.00

Arial-51 Sky-SDR
OR

Details

Here is a new SDR QRP transceiver with an outstanding receiver that offers a lot in a very small package. Tuck it into your rucksack or even a large coat pocket.

GENERAL TRANSCEIVER  SPECIFICATIONS
Solid State SDR-DSP Direct Conversion
Frequencies / Bands 1.8 MHz to 54.0 MHz 160, 80, 60, 40, 30, 20, 17, 15, 12, 10, & 6m 
Modes AM, CW, DIGI, FM, LSB, USB CAT: USB2 (FTDI Chip)
Digital Modes JST, PSK, RTTY, SSTV, etc. LINE IN/OUT 3.5mm Jack
Output Power 5 Watts (typical) (foldback protection for high SWR)
Antenna 50 Ohms (nominal) BNC Connection
Voltage requirements 10.5vdc (min) to 15vdc (max) Fuse: 3.15A, 250V, Slow Blow
Current Drain RX: 350mA; TX: 2A 
Frequency Stability ±3 ppm 0 to 50 degrees Centigrade
Memory 100 Memory slots (0-99) stores freq., mode, and VFO (A/B) & other functions
Loud Speaker 1/4 Watt 
Display Backlight always ON, always OFF, or automatic off after 3 seconds - (saves 40 mA)
Enclosure Size 12.8 x 10.7 x 5.5 cm (excluding knobs and connectors)
Working Size 14.7 x 10.7 x 7 cm (including knobs and connectors)
Weight 580 grams (20.5 oz.) (without mic)



RECEIVER SPECIFICATIONS
 
  • Technology Solid State SDR-DSP Direct Conversion
  • Sensitivity 0.2 u V with preamp on
  • Preamp +16 dB 
  • Attenuator -6 dB 
  • Pre-Filtering 7 LPF and 7 BPF (cascaded) 160m, 80m, 60+40m, 30+20m, 17+15m, 12+10m, 6m
  • Spurious Response Rejection IMD3: -48 dB 
  • Current Drain backlight: ON / OFF 350mA / 310mA
  • RX Bandscope ±24 kHz 
  • DSP RX Filters 4 filters (most modes), user definable / push-button selection
  • SSB Filters (4) 4 filters, 3 "Fixed Filters" and 1 with bandwidth and passband user adjustable from 250 Hz to 3600 Hz
  • CW Filters (4) 4 filters, 3 "Fixed Filters" and 1 with bandwidth adjustable from 20 Hz to 1200 Hz
  • AM Filters (4) 4 filters, 3 "Fixed Filters" and 1 with bandwidth adjustable from 2000 Hz to 9600 Hz
  • FM Filters (4) 4 filters, 3 "Fixed Filters" and 1 with bandwidth adjustable from 2000 Hz to 9600 Hz
  • DIGI Modes (1) 1 filter with Bandwidth fixed: 3.35 kHz
  •  
  • DSP Noise Reduction Adjustable Level (1 to 50) use lowest level necessary
  • DSP Noise Blanker Adjustable Level (4 to 12) Adjust for minimum interference
  • DSP "ACE" Automatic Carrier Eliminater for SSB (only) better than -40dB
  • S-Meter Bar Graph or uV readout 
  • CW Mode Selection CW or CWReverse Menu selectable
  • Squelch Adjustable for FM & Other Modes 0 to 100 / "0" = Off
 
 
TRANSMITTER SPECIFICATIONS
 
  • Output Power 5 Watts (typical) / adjustable (foldback protection for high SWR)
  • TX Metering Selectable: Output Power or SWR Selectable: Numerical or Bar Graph
  • D.C. Voltage Metering Numerical display 
  • VOX Adjustable Gain & Delay 
  • Compressor Adjustable 0-20dB 
  • Reverburation Adjustable 
  • SSB TX Mute Disable = Monitor / Enable = Mute
  • Key Type Selectable: Automatic = Paddle / Manual = Hand-Key
  • Built-In Keyer Iambic Mode A or Mode B Menu selectable
  • Keyer Adjustments Speed / Weight Menu adjustment
  • CW Sequencing adjustable delay from 100ms to 5 seconds
  • Digi Mode Gain adjusts audio gain in digi mode 
  • AMP Key (PTT JACK) Keys External Amplifier 
  • TX DSP FILTERS 1 Filter per Mode (adjustable) 
  • SSB TX Filters bandwidth & passband user adjustable From 250 Hz to 3600 Hz
  • CW TX Filters from 50 Hz to 2400 Hz
  • AM TX Filters from 3600 Hz to 9600 Hz
  • FM TX Filters from 2000 Hz to 9600 Hz
  • DIGI TX Filters fandwidth: fixed: 3.35 kHz
  • TX Bandscope Monitors transmitted signal



Additional Information

manufacturer No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register