Elecraft K-Pod

In stock
SKU
K-POD
£349.95 £291.62
Quick Overview

Interface for K4, K3 or K3S transceivers

Elecraft K-Pod is available to buy in increments of 1

K-POD

The K-Pod is an ideal companion to your Elecraft K4, K3 or K3S Transceiver, maximizing both convenience and operating efficiency. At only 3.5 x 3 x 1 inches (9 x7.5 x 2.5 cm), it can be placed anywhere the action is, typically next to a computer keyboard. It’s versatile enough to integrate transceiver and station control functions, putting you in command as never before.

A utility jack beneath the K4, K3 and K3S radio’s front panel acts as the K-Pod’s data interface. The unit can be powered from the radio’s rear 12-V accessory output, the pod’s own USB port, or any 8-15 V, 50-mA DC power source.*

*The K-Pod can also be powered directly through its data cable. This may require a minor modification to your radio’s front panel module.

SPECIFICATION:

Weighted, Soft-Touch Knob

Assignable to VFO A, VFO B, or RIT/XIT Offset, the K-Pod has a heavy, free-spinning knob with a great feel that won’t wear you down during extended operation. It’s attached to a 400-count ball-bearing optical encoder, providing fine-grain frequency control. Friction can be adjusted to individual preference.

You can instantly map the knob to VFO A, VFO B, or RIT/XIT offset using the K-Pod’s rocker switch. Three of the unit’s user-definable LEDs indicate rocker switch position, by default. Switch events can also be audibly reported by the K-Pod’s built-in audio transducer.

8 Programmable Switches

Control existing radio functions or create your own functions.
Each of the K-Pod’s tactile-feedback switches (F1-F8) has a programmable tap and hold functions. For example, they can be used to duplicate controls on the radio’s front panel or as hot keys into often-used menu entries.

But the possibilities go well beyond this. When a K-Pod switch is pressed, it can execute a series of one or more commands stored in the transceiver itself. A command sequence can engage complex VFO splits or special receiver settings, play transmit messages, clear the RIT offset, select a receive antenna, toggle diversity reception,
etc. The K-Pod manual includes step-by-step instructions for switch programming, with many examples.

USB Port and 3 General-Purpose Outputs

A USB port is provided on the K-Pod for firmware updates and future station control uses. This port can also be used to configure the K-Pod’s switches to perform other special functions, such as activating the unit’s 3 general-purpose outputs. These outputs are open-drain, acting as contact closures to control relays, etc., in other station gear.

More Information
Manufacturer Elecraft
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account