ELECRAFT K4 - Made To Order
MADE TO ORDER IN THE USA, please allow time for delivery. By all means call us for the latest delivery expectations.
We are pleased to announce the availability of the new Elecraft K4 HF transceiver.
The K4 transceiver provides 160-6m, all-mode coverage; 100 W output; five receive RF sources; and wideband dual watch, allowing the main and sub receivers to be set for the same or different bands.
VHF and UHF 15W modules are planned to further extend the frequency range.
Two Year Warranty on Elecraft bought from Waters & Stanton
• DIRECT SAMPLING + OPTIONAL SUPERHET (HDR) MODULE
Direct sampling allows for advanced filtering, NR, NB, noise nulling, etc.;
Optional HDR module provides the ultimate in dynamic range
• 160-6 M, ALL MODES, 100 W / 10 W; WIDEBAND DUAL RECEIVE
Main/sub receivers can be on same or different bands; single or dual panadapters
• MODULAR ARCHITECTURE
Add HDR module, future 15 watt VHF/UHF module, etc., as needed
• OPTIMIZED USER INTERFACE
Encoders for VFO A, VFO B, RIT/XIT offset; many user-programmable controls
• HIGH-PERFORMANCE TUNING AID
High resolution mini-pan,per-receiver, for accurate tuning & search
• NO-COMPROMISES CW
Silent PIN-diode T/R; fast QSK; many features for CW ops
• EXTENDED I/O
HDMI, Ethernet, analog/digital audio; ATU with 3 ant. jacks; up to 5 RX ant. sources
• VERSATILE SOFTWARE ENGINE
Powerful, fast-booting CPU accommodates future in-box software applications
Light weight, low current drain – compatible with field operation
A direct-sampling SDR you’ll love to use
Our new K4 harnesses the latest in signal processing while retaining the best aspects of the K3S and P3. The resulting user interface makes the technology transparent, allowing you to focus on working the world.
160-6 meter, all-mode coverage & dual RX
The K4 includes dual receive over 100 kHz to 54 MHz. Since it utilizes direct sampling, there’s no need for crystal filters in the K4 or K4D (see Models, back page). For extreme-signal environments, we offer a dual superhet module (standard in the K4HD). An internal VHF/UHF module is also planned.
High-resolution mini-pan for each receiver
Our advanced fine-tuning aid, with its resampled bandwidth as narrow as +/- 1 kHz, is displayed separately from the main panadapter. You can turn it on by tapping either receiver’s S-meter or by tapping on a signal of interest.
Simple operation and setup
The K4 features a large, full-color touch display, combined with a rich set of real controls. Per-VFO transmit metering makes split mode completely foolproof. Band-stacking switches and per-receiver controls are both intuitive and versatile, adapting to operating context. Usage information on these and other features is just one tap away, thanks to our built-in help system.
Rich I/O complement
The rear panel includes all the RF, analog and digital I/O you’ll need to complete your station. All K-line accessories are supported, including amps, ATUs, and our K-Pod station controller. The HDMI video output supports an external display with its own user-specified format.
Full remote control from multiple devices
The K4 can be 100% remote controlled, via Ethernet, from a second K4 as well as a PC, notebook, or tablet. Panadapter data is included in all remote displays.
Modular hybrid architecture
The K4 adapts to your needs, with three models to choose from: basic K4 with wide-range dual receive; K4D, with diversity receive; and K4HD, with a dual superhet module for exceptional dynamic range. You can upgrade or add options as desired, or as new technology becomes available. This extensibility applies to software as well. The K4's powerful, fast-starting CPU provides unlimited expansion opportunities.
Fast signal processing
The RF signal chain in the K4 incorporates parallel hardware processing of data streams, including a dedicated DSP subsystem. This, combined with silent, PIN-diode T/R switching, ensures fast CW break-in. Data and speech-processing delays are also minimized.
Standard DSP features include easy-to-adjust, per-mode RX/TX EQ; clean, punchy RF speech processing; full DVR capabilities; and several built-in data decode/encode modes. Direct-sampling technology results in an ultra-flat passband response for clean RX and TX audio. Since the signal chain is software-defined, the DSP can be field upgraded to add new algorithms and operating modes.
KAT4 ATU: The KAT4 ATU has a nominally 10:1 matching range. It includes 3 antenna jacks, any one of which can be selected as an input for one or both receivers.
KPA1500 Amplifier: 160-6 m full-legal-limit amp with silent PIN-diode QSK and built-in wide-range ATU. Matches K4 size and styling.
SP4 Speaker: Hi-fidelity external speaker with A/B source selection. One or two SP4s can be directly driven by the K4 or other transceivers.
K-Pod Controller: Includes a precision, 400-step optical encoder for use as VFO A, VFO B, or RIT/XIT offset, plus 8 dual-function programmable switches. Can be directly connected to any K4 USB-A jack.
MH4 microphone: Hi-fidelity hand mic with PTT and VFO up/down controls.
Key Specs / Features
Size: 4.5”H x 13.5”W, 10” D
Weight: Approx. 10 lbs
Supply Voltage: 12-15 VDC
Current: ~2 A RX, ~18-23 A TX
Freq. Range: 100 kHz - 54 MHz (VHF/UHF range to be determined*)
Stability: +/- 0.25 ppm (TCXO)
Modes:CW, SSB, AM, FM, Data
LCD: 7” color; touch & mouse control
Text modes:CW, PSK31/63, RTTY
RX ant. sources: Up to 5
A-to-D Converter(s): 16 bits
I/O: USB-A x3, USB-B (two virtual com ports + audio), RS232 (DE9), Ethernet, HDMI. front/rear mic, front/rear phones, LINE in/out, speakers, PTT in, KEY out, paddle, key, ACC,12 V out.
CW QSK: silent, PIN-diode switched
Other:RX/TX EQ, real-time clock,100% remote control including panadapter data, remote antenna switch control*, custom in-box software apps*