SSB-SP-23

Quick Overview

1250-1300MHz 23cm mast head pre-amplifier

Excl. Tax: £416.62 Incl. Tax: £499.95
SSB-SP-23
OR

Details

SP-23

1250-1300MHz 23cm mast head pre-amplifier

The low-noise preamplifiers of the SB Super-Amp series are available for the amateur radio bands 6 m, 2 m, 70 cm, 23 cm and 13 cm.


All models are equipped with low-noise GaAs-FET devices which are safeguarded against HF by a an effective
protective circuit.
 
To suppress unwanted signals two filters are used in the SB range by etched Microstrip-Filters on the ceramic board and high-value Helix filters.

The SB Super-Amp amplifiers can be operated alternatively with a remote or direct feed. The relay circuit is RF sensing so can be simply installed with automatic changeover to TX if required. However, when a power amplifier is used, we recommend our Sequence Controller DCW 2004 B-SHF to ensure  the correct sequential receive/transmit switchover, controlling the relays with-out the risk of arcing.

  • Power to the units is supplied by the coaxial cable (remote power supply).

  • All SB Super-Amp amplifiers are manufactured in a UV-resistant, weatherproof housing using N-Type sockets. Hot-dip galvanized clamps and installation material are supplied

  • Frequency range/MHz  1250-1300
  • Noise figure  1.5 dB
  • Amplification    20 dB
  • Switching power w. HF-Vox  10 W
  • Permissible power
  • w. DCW-2004 (SSB 100W)
  • Permissable power  w. DCW-2004 (FM) 100W
  • Insertion loss  0,4 dB
  • Operating voltage  13,8 V
  • Current consumption  400 mA
  • max. Mast diameter  58mm

Additional Information

manufacturer SSB

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register